ADAPTATEUR PDA USB #F5U109EA - USB adapter BELKIN - Free user manual and instructions

Product Type	USB Adapter for PDA
Brand	Belkin
Model	F5U109EA
Interface	USB to Serial (RS-232)
System Compatibility	Windows 98/98 SE/ME/2000/XP
PDA Compatibility	Palm OS (Palm Pilot, etc.)
Serial Speed	Up to 19200 kbps (configurable 9600)
Power	USB Bus Powered
Cable Length	Approximately 15 cm
Weight	Approximately 30 g
Dimensions (L x W x H)	60 x 20 x 15 mm
Color	Gray/Black
Functions	HotSync synchronization, serial connection via USB
Maintenance	Clean with a soft dry cloth, avoid moisture
Safety	Use only with compliant USB ports, do not expose to water
Package Contents	Adapter, user manual
Warranty	2 years (according to manufacturer)

Frequently Asked Questions - ADAPTATEUR PDA USB #F5U109EA BELKIN

How to install the Belkin F5U109EA adapter on Windows?

Plug the adapter into a free USB port. Windows should detect it automatically. If necessary, install the drivers provided on the CD (or downloadable from the Belkin website).

Why is my PDA not syncing with HotSync?

Check that the HotSync manager is set to Local Serial (not Local USB). Make sure the COM port assigned to the Belkin adapter is the same as the one selected in HotSync. Set the speed to 19200 kbps (or 9600 if problems).

How to find the COM port assigned to the Belkin adapter?

Under Windows, open Device Manager (right-click on My Computer > Properties > Hardware > Device Manager). Expand the Ports section. The adapter appears as 'Serial on USB (COM#)' or 'Belkin COM Port (COM#)'. Note the COM number.

Is the adapter compatible with Windows 10?

The manual mentions Windows 98 to XP. Under Windows 10, it may work with generic drivers, but without guarantee. Try plugging it in and check if it is recognized. Otherwise, search for compatible drivers on the Belkin website.

What if HotSync fails to connect?

Make sure the internal modem does not share the same COM port as the adapter. Check in Device Manager that both devices do not use the same COM number. If so, change the modem port (under Windows 2000/XP).

Can I use this adapter with a non-Palm PDA?

The adapter is designed for Palm PDAs using the serial protocol. Other PDAs with a serial port might work, but compatibility is not guaranteed. Test with your device.

How to clean the adapter?

Unplug the adapter before cleaning. Use a soft dry cloth to wipe the contacts and casing. Avoid solvents or water.

What if the adapter's light does not turn on?

Check that the adapter is properly plugged into a functional USB port. Test on another USB port. If still no light, the adapter may be defective. Contact Belkin support.

Does the adapter require external power?

No, the adapter is powered by the USB port (bus power). No external power is required.

Where to download drivers for this adapter?

Drivers are available on the official Belkin website (www.belkin.com). Search in the support section with the reference F5U109EA. You can also use Windows generic drivers.

USER MANUAL ADAPTATEUR PDA USB #F5U109EA BELKIN

Please make sure you have the latest version of the Palm software. Go to http://www.palm.com for current updates.

Suggested settings for the Palm HotSync Manager:

1. You can access the HotSync Manager by clicking on the red and blue HotSync icon on your System Tray in the lower right corner of your desktop next to the time. If your HotSync icon doesn't show up in your System Tray, you can go to "Start", "Programs", "Palm Desktop", and then "HotSync Manager". The icon will now appear on your System Tray.
2. In the menu of the HotSync icon on your taskbar, be sure to choose "Local Serial" and not "Local USB". If you only have "Local" as an option, just choose "Local". Click "Setup" and click on the "Local" tab.
3. Make sure the COM port shows the same COM port as the one assigned to the Belkin adapter (this can be found in the Device Manager).
4. Set the speed to 19200kps. (If your PDA doesn't connect at this speed, try lowering the speed to 9600kps.)

Please make sure that the internal modem and the Belkin adapter are not sharing the same COM port.

To find out what COM port your internal modem is assigned to:

For Windows 98, 98 SE, or Me:

1. Click "Start", "Settings", and then "Control Panel".
2. Double-click on "Modems".
3. Click on the "Diagnostics" tab to see what COM port is assigned to the modem.

ADDENDUM (Continued)

For Windows 2000 or XP:

1. Click "Start", "Settings", and then "Control Panel".
2. Double-click "Phone and Modem Options".
3. Click the "Advanced" tab ("Modem" tab for XP) to see what COM port is assigned to the modem.

To find out what COM port the Belkin adapter is assigned to:

For Windows 98, 98 SE, or Me:

1. Right-click on "My Computer" and select "Properties".
2. Click the "Device Manager" tab.
3. Click the (+) next to "Ports". Belkin will be listed as "Serial on USB (COM #)", "USB COM Port (COM #)", or "Belkin COM Port (COM #)".

For Windows 2000 or XP:

1. Right-click on "My Computer" and select "Properties".
   Note: If you are using Windows XP and the "My Computer" icon does not appear on the desktop, click on "Start" and then right-click on the "My Computer" icon and select "Properties".
2. Click on the "Hardware" tab and select "Device Manager".
3. Click the (+) next to "Ports". Belkin will be listed as "Serial on USB (COM #)", "USB COM Port (COM #)", or "Belkin COM Port (COM #)".

ADDENDUM (Continued)

En

How to move a modem to a different COM port:

You can only change the COM ports in the Windows 2000 and XP operating systems.

1. Right-click on "My Computer" and select "Properties".
2. Click on the "Hardware" tab and select "Device Manager".
3. Click the (+) next to "Modem". Double-click the name of your modem (i.e. Conexant 56k modem).
4. Click on the "Port Settings" tab and click on "Advanced" to see what COM port the modem is on. Select an available COM port (it will say "in use" if it's not available) and click "OK".

If you are still unable to perform a HotSync function:

1. Try uninstalling the Palm desktop software.
2. Uninstall the Belkin software.
3. Re-install the Palm desktop software first and then re-install the Belkin software.
4. If the problem persists, go into Device Manager and click the (+) next to "Universal Serial Bus Controllers" to find out which USB controller you have on your system. If you have an ALI, VIATECH, SIS or NEC USB controller, you may need to get a patch from the manufacturer's website.
5. After the necessary patch is installed on your system and all settings for the PDA are correct, you should now be able to perform a HotSync function through the adapter.

Should the issue persist, you can contact Belkin Technical Support for detailed assistance.

ADDENDUM

Adaptateur PDA USB (Reference Belkin: F5U109)

Belkin Components, Ltd.

Express Business Park

Shipton Way • Rushden •

NN10 6GL • United Kingdom

Tel [phone]

Fax [phone]

Belkin Components B.V.

Starparc Building • Boeing Avenue 333 •

1119 PH Schiphol-Rijk

The Netherlands

Tel [phone]

Fax [phone]

Belkin Components, Ltd.

7 Bowen Present

West Gosford

NSW 2250 • Australia

Tel [phone]

Fax [phone]

© 2002 Belkin Components. All Rights Reserved. All Trade Names Are Registered Trademarks of

Respective Manufacturers Listed.